Wireless RGB Led Strip Controller (R/F)
|
Input Voltage
|
12 Volts, DC
|
|
Rated load current
|
10A (All 3 Channels)
|
|
Maximum load
|
15A (All 3 Channels)
|
|
Output
|
3 X CMOS
|
|
Control Method
|
4 buttons, wireless control (11 modes, speed, On/Off)
The RGB Controller is used to control RGB Led Strips. Includes handheld RF wireless remote control which can select 1 of 7 Static Modes or 1 or 4 Dynamic Color-Changing Modes with Speed and ON/OFF controls. Can drive up to 10 meters of RGB Led Strips, for longer runs use an RGB Amplifer. Powered by 12VDC power supplies sold separately.
Control method: Four buttons, wireless control
Buttons (from top to bottom): MODE, UP, DOWN, ON/OFF
Mode button: Press to advance to the next mode; Total of 11 modes
Button-Up/Down: adjust the speed of colour change
On/Off Button: Press to switch on or off
Modes:
1. Static red
2. Static green
3. Static Blue
4. Static Yellow (colour-mix)
5. Static Cyan (colour-mix)
6. Static purple (colour-mix)
7. Static White (colour-mix)
8. Colour cycle
9. Random flash cycle
10. Slow colour fading
11. Random colour changing
Note:
This set cannot perform dimming, if you are looking for a dimmable wireless rgb led controller please check for LT-SYSTEM-3600RC.
Remote control is based on RF technology; it can also work though walls!
|
|
|
|
Measurement
|
104 X 65 X 24 (mm)
|
|
Gross weight
|
300 grams
|
Note: This wireless LED Controller can drive 10 meters of RGB Led Strip lighting (colour changing) and includes an RF remote control. Requires additional switching mode power supply 12V.
|
